Drive Sprocket Support Installation

Fig 1: Inspecting Converter Seal Drain Holes For Blockage

Courtesy of GENERAL MOTORS CORP.

Inspect the drive sprocket support (43) for damage to the stator shaft splines, the journals, the bushings, and the roller bearing.
Inspect the converter seal drain holes for blockage.

Fig 2: Locating Drive Sprocket Support

Courtesy of GENERAL MOTORS CORP.

Install the drive sprocket support (43) into the bell housing of the transmission case.
Install the six drive sprocket support bolts (53) into the drive sprocket support (43).

NOTE: Refer to Fastener Notice in Cautions and Notices.