Removal Procedure

Fig 1: Removing Shift Lock Control Solenoid Electrical Terminals From Connector Body

Courtesy of GENERAL MOTORS CORP.

Disable the SIR system. Refer to SIR Disabling and Enabling Zones in SIR.
Remove the automatic transaxle control assembly. Refer to Shift Control Replacement in Automatic Transaxle - 4740-E/4T45-E.
Using an electrical terminal pick, remove the solenoid electrical terminals from the connector body.

Fig 2: Drilling Out Shift Lock Control Solenoid Rivet At Control Assembly

Courtesy of GENERAL MOTORS CORP.

Using a 5/32 in drill bit, drill out the rivet attaching the solenoid to the control assembly.

Fig 3: Removing/Installing Shift Lock Control Solenoid

Courtesy of GENERAL MOTORS CORP.