Conditions for Running the DTC

DTCs P0068, P0102, P0103, P0107, P0108, P0112, P0113, P0116, P0117, P0118, P0125, P0128, P0401, P0403, P0404, P0405, P0442, P0443, P0446, P0449, P0455, P0496, or P1404 are not set.
The engine is running.
The ignition 1 signal is between 11-18 volts.
If the ignition 1 signal is less than 11.5 volts, then the MAF must be less than 40 g/s.
The throttle position indicated angle is less than 50 percent.
The change in the throttle position indicated angle is less than 15 percent.
The traction control is inactive, if equipped.
The MAP sensor is less than 80 kPa.
The change in the MAP sensor is less than 5 kPa.
The above conditions are met for more than 2 seconds.