FixVault
Home › Saturn › 2005 › Relay AWD › Repair and Diagnosis › Engine Performance › System › Engine Control System - 3.5L - Introduction (2 Of 2) › Repair Instructions › Mass Air Flow (MAF) Sensor Replacement › Removal Procedure

Removal Procedure

  1. Turn OFF the ignition.
    2. Fig 1: Identifying Mass Air Flow (MAF) Sensor
    GM1544729Courtesy of GENERAL MOTORS CORP.
  2. Disconnect the mass air flow (MAF) sensor electrical connector (1).
  3. Remove the air inlet duct. Refer to Air Cleaner Intake Duct Replacement .
  4. Remove the MAF sensor (2) from the air filter housing.
About FixVault