FixVault
Home › Saturn › 2005 › Relay AWD › Repair and Diagnosis › External Pages › Different car › Section 105 (Theft Deterrent System) › Repair Instructions › Theft Deterrent Control Module Replacement › Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2005 Pontiac Aztek and 2005 Buick Rendezvous. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disable the SIR. Refer to SIR Disabling and Enabling Zone 3 in SIR.
  2. Remove the trim covers. Refer to Steering Column Trim Covers Replacement in Steering Wheel and Column.
  3. Remove the theft deterrent module wiring harness from the steering column harness.
  4. Disconnect the electrical connector.
    5. Fig 1: View Of Theft Deterrent Control Module
    GM860152Courtesy of GENERAL MOTORS CORP.
  5. Pull the theft deterrent module (2) away from the lock cylinder housing (1).
About FixVault