Removal Procedure

WARNING: This page is about a different car, the 2005 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.

Open the hood.

Fig 1: Releasing Lower Tab Retainers From Slots

Courtesy of GENERAL MOTORS CORP.

Remove the fascia grille. Refer to Fascia Grille Replacement in Bumpers.

Fig 2: Removing Fastener Retaining The Ambient Air Temperature Sensor

Courtesy of GENERAL MOTORS CORP.

Remove the fastener retaining the ambient air temperature sensor to the front impact bar.
Disconnect the electrical connector from the ambient air temperature sensor.
Remove the sensor from the vehicle.