Installation Procedure

WARNING: This page is about a different car, the 2005 Pontiac Aztek and 2005 Buick Rendezvous. However, it is still accessible from the selected car via links, so may be relevant.

Apply sealant GM P/N 12345382 or equivalent to the pressure test hole plug.

Fig 1: View Of Line Pressure Pipe Plug

Courtesy of GENERAL MOTORS CORP.

NOTE: Refer to Fastener Notice in Cautions and Notices.

Install the pressure test hole plug (38).
Tighten: Tighten the pressure test hole plug (38) to 12 N.m (106 lb in).
Install the throttle body air inlet duct. Refer to Air Cleaner Assembly Replacement in Engine Controls-3.4L.