Rear License Lamp Replacement
WARNING: This page is about a different car, the 2007 Pontiac Montana SV6, 2007 Chevrolet Uplander, and 2007 Buick Terraza. However, it is still accessible from the selected car via links, so may be relevant.
Rear License Lamp Replacement
| Callout | Component Name |
|---|---|
|
NOTE:
Refer to Fastener Notice
. Fastener Tightening Specifications:
Refer to Fastener Tightening Specifications . |
|
| Rear License Plate Lamp Replacement | |
| 1 | Screw, Rear License Plate Lamp (Qty: 4) Tighten: 2 N.m (18 lb in) |
| 2 | Lens, Rear License Plate Lamp (Qty: 2) Tip: Remove and replace the bulbs if necessary after the lens has been removed. |