FixVault

Installation Procedure

WARNING: This page is about a different car, the 2007 Pontiac Montana SV6, 2007 Chevrolet Uplander, and 2007 Buick Terraza. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Removing/Installing Windshield
    GM1480103Courtesy of GENERAL MOTORS CORP.
  1. Install a stationary window into the opening. Refer to Urethane Adhesive Installation of Stationary Windows .
  2. Install the windshield garnish moldings. Refer to Windshield Pillar Garnish Molding Replacement .
  3. Install the rearview mirror. Refer to Rearview Mirror Replacement .
  4. Install the air inlet grille. Refer to Air Inlet Grille Panel Replacement (Buick) or Air Inlet Grille Panel Replacement (Chevrolet) or Air Inlet Grille Panel Replacement (Pontiac) .
  5. Install the windshield wiper arms. Refer to Wiper Arm Replacement .
  6. Remove the double layer of masking tape from around the perimeter of the painted surfaces and the interior trim.
  7. Close the hood.