FixVault

Installation Procedure

WARNING: This page is about a different car, the 2005 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Removing Receiver From Vehicle
    GM1250536Courtesy of GENERAL MOTORS CORP.
  1. Install the receiver to the vehicle.
  2. Connect the electrical connectors to the receiver.
  3. Install the rear window shelf panel. Refer to Trim Panel Replacement - Rear Window Shelf (Sedan) or Trim Panel Replacement - Rear Window Shelf (Extended Sedan) in Interior Trim.