FixVault
Home › Saturn › 2005 › Relay AWD › Repair and Diagnosis › External Pages › Different car › Section 35 (Wiper System & Washer System) › Repair Instructions › Wiper Motor Module Support Bracket Replacement › Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2005 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the wiper arms. Refer to Wiper Arm Replacement .
  2. Remove the air inlet grille panel. Refer to Air Inlet Grille Panel Replacement in Body Front End.
  3. Remove the wiper drive system module. Refer to Wiper Drive System Module Replacement .
    4. Fig 1: Removing 3 Wiper Motor Module Support Bracket Screws
    GM1206999Courtesy of GENERAL MOTORS CORP.
  4. Remove the 3 wiper motor module support bracket screws.
  5. Remove the wiper motor module support bracket from the wiper motor.
About FixVault