FixVault
Home › Saturn › 2005 › Relay AWD › Repair and Diagnosis › External Pages › Different car › Section 35 (Wiper System & Washer System) › Repair Instructions › Wipers/Washer Switch Replacement › Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2005 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Releasing Windshield Wiper Switch From Stalk Switch Mount
    GM1230516Courtesy of GENERAL MOTORS CORP.
  1. Install the windshield wiper switch on to the stalk switch mount.
  2. Connect the electrical connectors.
  3. Install the steering column trim covers. Refer to Steering Column Trim Covers Replacement in Steering Wheel and Column.
About FixVault