Installation Procedure

WARNING: This page is about a different car, the 2005 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Installing Front License Plate Bracket To Bumper Bolts

Courtesy of GENERAL MOTORS CORP.

Install the front license plate bracket to the bumper.

NOTE: Refer to Fastener Notice in Cautions and Notices.

Install the front license plate bracket retaining bolts to the bumper.
Tighten: Tighten the front license plate bracket retaining bolts to 3 N.m (27 lb in).