Installation Procedure

WARNING: This page is about a different car, the 2005 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View Of Stabilizer Link At Strut Assembly

Courtesy of GENERAL MOTORS CORP.

NOTE: Refer to Fastener Notice in Cautions and Notices.

Connect the stabilizer link to the strut assembly.
Tighten: Tighten the stabilizer link nut to 65 N.m (48 lb ft).

Fig 2: View Of Stabilizer Link And Stabilizer Shaft

Courtesy of GENERAL MOTORS CORP.

Connect the stabilizer link to the stabilizer shaft.
Tighten: Tighten the stabilizer link nut to 65 N.m (48 lb ft).
Install the front wheel. Refer to Tire and Wheel Removal and Installation in Tires and Wheels.
Lower the vehicle.