Installation Procedure

WARNING: This page is about a different car, the 2005 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Releasing Exhaust Pipe Insulators From Underbody Hangers

Courtesy of GENERAL MOTORS CORP.

With the aid of an assistant, install the muffler to the hangers.

Fig 2: Identifying Rear Catalytic Converter To Muffler (3.5L)

Courtesy of GENERAL MOTORS CORP.

NOTE: Refer to Fastener Notice in Cautions and Notices.

If equipped with a 3.5L (LX9) engine, remove the rear catalytic converter to muffler nuts.
Tighten: Tighten the nuts to 30 N.m (22 lb ft).

Fig 3: Identifying Intermediate Pipe To Muffler (2.2L)

Courtesy of GENERAL MOTORS CORP.

If equipped with a 2.2L (L61) engine, install the intermediate pipe to muffler nuts.
Tighten: Tighten the nuts to 30 N.m (22 lb ft).
Lower the vehicle.