Rear Camber Adjustment
WARNING: This page is about a different car, the 2005 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.
- Loosen the inner lower control arm cam bolt nuts.
- Rotate the cam bolts to the required camber specification setting. Refer to Measuring Wheel Alignment .
- Maintain the camber setting while tightening the cam bolt nuts.
Tighten: Tighten the inner lower control arm (front) bolt nut to 110 N.m (81 lb ft).
- Check the camber setting after tightening.
- Adjust the camber setting if necessary.
NOTE:
Refer to Fastener Notice
in Cautions and Notices.
IMPORTANT:
Check the toe setting AFTER changing camber or caster.