FixVault
Home › Saturn › 2005 › Relay FWD › Repair and Diagnosis › Brakes › Antilock Brake System, Traction Control System & Stability Control System › Repair Instructions › Wheel Speed Sensor Replacement - Front › Installation Procedure

Installation Procedure

  1. Install the hub and bearing assembly to the vehicle. Refer to Wheel Bearing/Hub Replacement - Front in Front Suspension.
  2. Lower the vehicle.
  3. Turn the ignition switch to the RUN position with the engine off.
  4. Perform diagnostic system check. Refer to Diagnostic System Check - Vehicle in Vehicle DTC Information.
About FixVault