Installation Procedure

WARNING: This page is about a different car, the 2005 Pontiac Aztek and 2005 Buick Rendezvous. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Front Bumper Energy Absorber (Aztek)

Courtesy of GENERAL MOTORS CORP.

Position the energy absorber to the front bumper impact bar.

Fig 2: View Of Front Bumper Energy Absorber Push-In Retainers (Aztek)

Courtesy of GENERAL MOTORS CORP.

Starting with the center hole, install the push-in retainers to the front bumper energy absorber.
Install the front bumper fascia. Refer to Fascia Replacement - Front Bumper - Upper (Aztek) or Fascia Replacement - Front Bumper - Upper (Rendezvous) .