Brake Apply Sensor (BAS) Replacement

WARNING: This page is about a different car, the 2005 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.

If the brake apply sensor (BAS) is replaced, the following procedures must be performed:

BCM Reprogramming-Refer to Body Control Module (BCM) Programming/RPO Configuration in Computer/Integrating Systems for replacement, setup, and programming.
Brake Pedal Position Sensor Calibration-Refer to Brake Pedal Position Sensor Calibration in Lighting Systems.
Theft Learn-Refer to Programming Theft Deterrent System Components in Theft Deterrent.