Installation Procedure

WARNING: This page is about a different car, the 2007 Pontiac Montana SV6, 2007 Chevrolet Uplander, and 2007 Buick Terraza. However, it is still accessible from the selected car via links, so may be relevant.

Position the ALC sensor and bracket (2) to the vehicle.

NOTE: Refer to Fastener Notice .

Install the height sensor bolts/screws.
Tighten: Tighten the height sensor bolts/screws to 12 N.m (106 lb in).

Fig 1: Identifying Automatic Level Control Sensor Bracket Bolts/Screws

Courtesy of GENERAL MOTORS CORP.

Install the ALC sensor link (3) to the ball stud (1).
Install the ALC sensor connector.
Lower the vehicle.
Install the ELC/TRAILER fuse.