FixVault
Home › Saturn › 2005 › Relay FWD › Repair and Diagnosis › External Pages › Different car › Section 2 (Adjustable Pedal System) › Repair Instructions › Adjustable Pedal Module Replacement › Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2005 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the instrument panel (I/P) closeout panel. Refer to Closeout/Insulator Panel Replacement - Left in Instrument Panel, Gages, and Console.
    2. Fig 1: Removing/Installing Adjustable Pedal Module From Side Of I/P Support Beam
    GM1469984Courtesy of GENERAL MOTORS CORP.
  2. Carefully cut and remove the tie strap securing the adjustable pedal module to the I/P support beam.
  3. Remove the adjustable pedal module (1) from the side of the I/P support beam.
  4. Disconnect the electrical connector from the adjustable pedal module.
About FixVault