Removal Procedure

WARNING: This page is about a different car, the 2005 Pontiac Aztek and 2005 Buick Rendezvous. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View Of Front Door Lock Switch Plate (Aztek)

Courtesy of GENERAL MOTORS CORP.

Remove the front door lock switch plate from the front door trim panel using a small flat-bladed tool at the front of the power window control switch.
Disconnect the electrical connector from the front door lock control switch.
Remove the front door lock control switch (1) from the front door trim panel.
Remove the front door lock control switch from the front door lock switch plate using a small flat-bladed tool.