FixVault
Home › Saturn › 2005 › Relay FWD › Repair and Diagnosis › Steering › Power Steering System › Repair Instructions › Power Steering Pump Replacement › Removal Procedure

Removal Procedure

  1. Remove the accessory drive belt from the pump. Refer to Drive Belt Replacement in Engine Mechanical - 3.5L.
    2. Fig 1: View Of Power Steering Pressure Hose From The Power Steering Pump
    GM417974Courtesy of GENERAL MOTORS CORP.
  2. Disconnect the power steering pressure hose from the pump.
    3. Fig 2: Identifying Power Steering Return Hose From The Power Steering Pump
    GM417981Courtesy of GENERAL MOTORS CORP.
  3. Disconnect the power steering return hose from the pump.
  4. Remove the engine electrical harness from the reservoir retainers.
    5. Fig 3: Locating Power Steering Pump Mounting Bolts
    GM281721Courtesy of GENERAL MOTORS CORP.
  5. Remove the power steering pump mounting bolts.
  6. Remove the power steering pump from the vehicle.
  7. Remove the power steering pump pulley from the pump. Refer to Power Steering Pulley Replacement .
  8. Remove the reservoir from the pump. Refer to Power Steering Reservoir Replacement - Off Vehicle (CB Series) .
About FixVault