FixVault
Home › Saturn › 2005 › Relay FWD › Repair and Diagnosis › Transmission › Automatic Trans › Automatic Transaxle - 4T65-E - Introduction & Repair Instructions › Repair Instructions › Automatic Transmission Range Selector Cable Replacement › Installation Procedure

Installation Procedure

    Fig 1: Illustrating Proper Routing Of Automatic Transaxle Range Selector Cable
    GM161144Courtesy of GENERAL MOTORS CORP.
  1. Properly route the automatic transaxle range selector cable through the engine compartment.
    2. Fig 2: View Of Automatic Transaxle Range Selector Cable In The Cowl
    GM161138Courtesy of GENERAL MOTORS CORP.
  2. Install the automatic transaxle range selector cable through the cowl.
    3. Fig 3: Identifying Range Selector Cable Retaining Clip
    GM1539229Courtesy of GENERAL MOTORS CORP.
  3. Install the automatic transaxle range selector cable to the steering column bracket (5).
  4. Install the retaining clip (4) to the automatic transaxle range selector cable (3).
  5. Install the automatic transaxle range selector cable (2) to the column control lever (1).
  6. Install the knee bolster. Refer to Knee Bolster, Insulator, Molding Replacement - Instrument Panel in Instrument Panel, Gages, and Console.
    7. Fig 4: Identifying Automatic Transmission Range Selector Cable
    GM1544831Courtesy of GENERAL MOTORS CORP.
  7. Install the automatic transaxle range selector cable to the automatic transaxle range selector cable bracket (4).
  8. Install the automatic transaxle range selector cable (1) to the automatic transaxle range selector lever (5).
  9. Install the retaining clip (2) to the automatic transaxle range selector cable (3).
  10. Adjust the automatic transaxle range selector cable. Refer to Automatic Transmission Range Selector Cable Adjustment .
  11. Install the throttle body air inlet duct. Refer to Air Cleaner Intake Duct Replacement in Engine Controls - 3.5L (LX9).
About FixVault