FixVault
Home › Saturn › 2005 › Vue Base, 2.2 D, AWD › Repair and Diagnosis › Engine Performance › System › Engine Controls - 2.2L (L61) Introduction › Repair Instructions › Intake Air Temperature (IAT) Sensor Replacement › Removal Procedure

Removal Procedure

  1. Turn the ignition OFF.
  2. Disconnect the IAT sensor harness connector.
  3. Remove the IAT sensor by pulling it out of the air induction tube.
    Fig 1: View Of Intake Air Temperature (IAT) Sensor
    GM946983Courtesy of GENERAL MOTORS CORP.
About FixVault