FixVault
Home › Saturn › 2005 › Vue Base, 2.2 D, AWD › Repair and Diagnosis › External Pages › Different car › Section 249 (Body Front End) › Repair Instructions › Splash Shield Replacement - Engine › Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2006 Buick LaCrosse and 2006 Buick Allure. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Right Engine Splash Shield & Retainers
    GM317814Courtesy of GENERAL MOTORS CORP.
  1. Install the engine splash shield to the lower flange of the engine compartment side rail.
  2. Route the ABS lead through the slot in the engine splash shield.
    3. Fig 2: Removing/Installing Engine Splash Shield & Retainers
    GM317813Courtesy of GENERAL MOTORS CORP.
  3. Align the holes in the engine splash shield to holes in the outboard side engine compartment side rail.
  4. Install the push-in retainers to the engine splash shield.
About FixVault