FixVault

Installation Procedure

  1. Install the air filter into the box.
  2. Install the air cleaner lid and snap clips onto the lid.
    Fig 1: Identifying Outlet Resonator/Duct Assembly
    GM898897Courtesy of GENERAL MOTORS CORP.
  3. NOTE: Refer to Fastener Notice in Cautions and Notices.
  4. Connect the outlet resonator duct assembly to the air cleaner lid. Tighten the clamp.

    Tighten:  Tighten the outlet resonator clamps to 4 N.m (36 lb. in.).

  5. Connect the intake air temperature (IAT) sensor connector.
    Fig 2: Connecting Intake Air Temperature (IAT) Sensor Connector
    GM951542Courtesy of GENERAL MOTORS CORP.