FixVault
Home › Saturn › 2005 › Vue Base, 2.2 D, FWD, Standard › Repair and Diagnosis › External Pages › Different car › Section 249 (Body Front End) › Repair Instructions › Splash Shield Replacement - Engine › Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2006 Buick LaCrosse and 2006 Buick Allure. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Removing/Installing Engine Splash Shield & Retainers
    GM317813Courtesy of GENERAL MOTORS CORP.
  1. Remove the push-in retainers that hold the ABS lead to the engine splash shield.
  2. Use the J 38778  in order to remove the push-in retainers from the engine splash shield. See Special Tools .
    3. Fig 2: Right Engine Splash Shield & Retainers
    GM317814Courtesy of GENERAL MOTORS CORP.
  3. Remove the engine splash shield from the lower flange of the engine compartment side rail.
About FixVault