FixVault
Home › Saturn › 2005 › Vue Red Line, AWD › Repair and Diagnosis › Electrical › Instrument Panel System Displays, Gauges And Console › Repair Instructions › Console Replacement › Installation Procedure

Installation Procedure

  1. Position the console on top of the center floor console.
    2. NOTE: Refer to Fastener Notice in Cautions and Notices.
    Fig 1: Removing/Installing Console Screws
    GM987556Courtesy of GENERAL MOTORS CORP.
  2. Install the console screws.

    Tighten:  Tighten the screws to 2.5 N.m (22 lb. in.).

  3. Connect the electrical connector to the auxiliary power outlet.
    Fig 2: View Of Auxiliary Power Outlet Electrical Connector
    GM1194731Courtesy of GENERAL MOTORS CORP.
  4. Reposition the center console.
  5. Install the cup holder screw.

    Tighten:  Tighten the screws to 2.5 N.m (22 lb. in.).

  6. Install the cup holder liner.
    Fig 3: Removing/Installing Cup Holder Liner
    GM1171184Courtesy of GENERAL MOTORS CORP.
  7. Reach under the front seats to access the lower console screws.
  8. Install the center console screws.

    Tighten:  Tighten the screws to 2.5 N.m (22 lb. in.).

    Fig 4: Locating Console Screws
    GM1152195Courtesy of GENERAL MOTORS CORP.
  9. Position the front seat forward to the original position.
About FixVault