FixVault
Home › Saturn › 2005 › Vue Red Line, AWD › Repair and Diagnosis › Engine Performance › System › Engine Controls - 3.5L (L66) Introduction › Repair Instructions › Intake Air Temperature (IAT) Sensor 2 Replacement › Removal Procedure

Removal Procedure

  1. Turn the ignition OFF.
  2. Disconnect the IAT sensor harness connector.
  3. Remove the IAT sensor from the side of the intake manifold (5).
    Fig 1: View Of Intake Air Temperature (IAT) Sensor 2
    GM1233528Courtesy of GENERAL MOTORS CORP.
About FixVault