Installation Procedure

Fig 1: View Of BPMV Bracket

Courtesy of GENERAL MOTORS CORP.

Install the BPMV assembly bracket to the vehicle.
NOTE: Refer to Fastener Notice in Cautions and Notices.
Install the brake pressure modulator assembly bracket mounting nut and mounting bolts.
Tighten:
- Tighten the nut to 25 N.m (18 lb ft).
- Tighten the bolts to 25 N.m (18 lb ft).
Fig 2: View Of Forward Lamp Harness Retainer
Courtesy of GENERAL MOTORS CORP.
Secure the forward lamp wiring harness retainer to the BPMV bracket.

Fig 3: Locating Insulator Nuts
Courtesy of GENERAL MOTORS CORP.
Install the brake modulator assembly to the bracket.
Tighten the 2 brake pressure modulator assembly insulator nuts (1).
Tighten: Tighten the nuts to 8 N.m (71 lb in).
Secure the EBCM wiring harness retainer to the BPMV bracket.