Installation Procedure

Fig 1: View Of Rear Compartment Release Switch Electrical Connector

Courtesy of GENERAL MOTORS CORP.

Connect the rear compartment release switch electrical connector.

Fig 2: View Of I/P Filler Panel
Courtesy of GENERAL MOTORS CORP.
Align the retaining fasteners with the I/P.
Push the filler panel in order to secure.
NOTE: Refer to Fastener Notice in Cautions and Notices.
Install the filler panel screws.
Tighten: Tighten the filler panel screws to 2.5 N.m (22 lb in).
Install the left I/P outer trim cover. Refer to Instrument Panel (I/P) Outer Trim Cover Replacement .