Conditions for Running the DTC

IMPORTANT: The following conditions must be met prior to ignition OFF.

DTCs P0095, P0096, P0097, P0098, P0107, P0108, P0112, P0113, P0117, P0118, P0125, P0128, P0336, P0443, P0446, P0452, P0453, P0455, P0461, P0462, P0463, P0464, P0496, P0502, P0503, P2610 are not set.
The diagnostic runs once after a cold start drive cycle.
DTC P0455 must run and pass.
The start up intake air temperature (IAT) is between 4-30°C (39-86°F).
The start up engine coolant temperature (ECT) is less than 30°C (86°F).
The start up IAT and ECT are within 8°C (15°F).
The barometric pressure (BARO) is more than 74 kPa.
The ambient air temperature is between 2-32°C (36-90°F).
The engine run time minimum is 10 minutes.
The vehicle has traveled more than 5 km (3.1 mi) this trip.
The ECT is more than 70°C (158°F).
The fuel level is between 15-85 percent.
The ignition is OFF.
One test occurs at ignition OFF after a drive cycle and may require up to 45 minutes to complete. No more than 2 tests per day are allowed. To report a fail, 5-12 tests must be completed.