FixVault
Home › Saturn › 2006 › Ion Red Line › Repair and Diagnosis › Engine Performance › System › Engine Controls - Introduction (2 Of 2) › Repair Instructions › Boost Control Solenoid Replacement › Installation Procedure

Installation Procedure

NOTE: Refer to Fastener Notice in Cautions and Notices.
Fig 1: Identifying Boost Control Solenoid
GM1686667Courtesy of GENERAL MOTORS CORP.
  1. Install the boost control solenoid and bolt.

    Tighten:  Tighten the bolt to 10 N.m (89 lb in).

  2. Connect the boost control solenoid connector.
About FixVault