Installation Procedure

Fig 1: Locating CKP Sensor

Courtesy of GENERAL MOTORS CORP.

Inspect the CKP sensor O-ring and lubricate with a mineral based grease.
Gently insert the CKP sensor (2) into the block.
NOTE: Refer to Fastener Notice in Cautions and Notices.
Install the CKP sensor bolt.
Tighten: Tighten the CKP sensor bolt to 10 N.m (89 lb in).
Reconnect the CKP sensor electrical connector.
Install the starter. Refer to Starter Motor Replacement (RPOs L61/LE5) or Starter Motor Replacement (RPO LSJ) in Engine Electrical.
Perform the CKP system Variation Learn Procedure. Refer to CKP System Variation Learn Procedure .