FixVault
Home › Saturn › 2006 › Ion Red Line › Repair and Diagnosis › Engine Performance › System › Engine Controls - Introduction (2 Of 2) › Repair Instructions › Fuel Injector Replacement › Removal Procedure

Removal Procedure

  1. Remove the fuel rail. Refer to Fuel Rail Assembly Replacement .
    Fig 1: View Of Fuel Rail & Injector Cups
    GM1381514Courtesy of GENERAL MOTORS CORP.
  2. Remove the fuel injector retainer clip (3).
  3. Remove the fuel injectors (5) from the fuel rail.
    IMPORTANT: Visually inspect the fuel injector in order to determine if the upper O-ring was also removed. If the upper O-ring is not removed, remove the O-ring from the fuel rail assembly.
  4. Remove and discard the fuel injector O-rings (4, 7).
About FixVault