FixVault
Home › Saturn › 2006 › Ion Red Line › Repair and Diagnosis › Engine Performance › System › Engine Controls - Introduction (2 Of 2) › Repair Instructions › Fuel Tank Filler Hose Replacement › Installation Procedure

Installation Procedure

Fig 1: Fuel Filler Pipe Jumper Hose
GM889977Courtesy of GENERAL MOTORS CORP.
  1. Connect the fuel filler hose to the fuel filler pipe.
  2. Connect the fuel filler hose to the fuel tank.
    NOTE: Refer to Fastener Notice in Cautions and Notices.
  3. Tighten the fuel filler hose clamps (1, 2).

    Tighten:  Tighten the clamps to 4.5 N.m (40 lb in).

  4. Lower the vehicle.
  5. Refill the fuel tank.
About FixVault