FixVault
Home › Saturn › 2006 › Ion Red Line › Repair and Diagnosis › Engine Performance › Testing & Diagnosis › Engine Controls - Introduction (2 Of 2) › Repair Instructions › Mass Air Flow (MAF) Sensor Replacement › Installation Procedure

Installation Procedure

Fig 1: View Of MAF Sensor
GM1386444Courtesy of GENERAL MOTORS CORP.
  1. Install the MAF sensor into the air cleaner housing.
    NOTE: Refer to Fastener Notice in Cautions and Notices.
  2. Secure the MAF sensor to the air cleaner housing with the 2 fasteners.

    Tighten:  Tighten the 2 fasteners to 2 N.m (18 lb in).

  3. Connect the MAF sensor electrical connector.
About FixVault