Installation Procedure

Fig 1: Locating Floor Pan Grommet & Mounting Nuts

Courtesy of GENERAL MOTORS CORP.

Position the shifter on the studs and install the front 2 nuts (2).
NOTE: Refer to Fastener Notice in Cautions and Notices.
Install the 2 rear nuts (3).
Tighten: Tighten the nuts to 25 N.m (18 lb ft).
Install the shift cables. Refer to Shift Control Cable Replacement .
Install the console. Refer to Console Replacement - Front Floor in Instrument Panel, Gages, and Console.