FixVault
Home › Saturn › 2006 › Relay 3.5 L, AWD › Repair and Diagnosis › Engine Performance › System › Engine Controls - 3.5L - Introduction (2 Of 2) › Repair Instructions › Fuel Level Sensor Replacement › Removal Procedure

Removal Procedure

    Fig 1: View Of Fuel Level Sensor
    GM1544791Courtesy of GENERAL MOTORS CORP.
  1. Remove the fuel sender assembly. Refer to Fuel Sender Assembly Replacement (Short Wheel Base)  or Fuel Sender Assembly Replacement (Long Wheel Base) .
  2. Disconnect the fuel level sensor electrical connector (1) from under the cover.
  3. Gently lift up the retainer (2) and slide the sensor down off of the bucket.
About FixVault