FixVault
Home › Saturn › 2006 › Relay 3.5 L, AWD › Repair and Diagnosis › Engine Performance › System › Engine Controls - 3.5L - Introduction (2 Of 2) › Repair Instructions › Powertrain Control Module Replacement › Installation Procedure

Installation Procedure

    Fig 1: Identifying Powertrain Control Module (PCM)
    GM1544730Courtesy of GENERAL MOTORS CORP.
  1. Install the PCM electrical connectors (4).
  2. Install the PCM (2) into the air cleaner assembly (3).
  3. Install the air cleaner assembly cover (1).
    4. NOTE: Refer to Fastener Notice in Cautions and Notices.
  4. Install the air cleaner assembly cover screws.

    Tighten:  Tighten the screws to 4 N.m (35 lb in).

  5. Install the left sheet metal diagonal brace. Refer to Front End Sheet Metal Diagonal Brace Replacement in Body Front End.
  6. Connect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection in Engine Electrical.
  7. If a new PCM is being installed, program the EEPROM. Refer to Control Module References in Computer/Integrating Systems.
About FixVault