FixVault
Home › Saturn › 2006 › Relay 3.9 1, AWD › Repair and Diagnosis › Engine Performance › System › Engine Controls - 3.9L - Introduction (2 Of 2) › Repair Instructions › Fuel Tank Pressure Sensor Replacement › Installation Procedure

Installation Procedure

    Fig 1: Locating Fuel Tank Pressure Sensor
    GM1480291Courtesy of GENERAL MOTORS CORP.
  1. Install the fuel tank pressure sensor.
  2. Connect the fuel sender wiring harness electrical connector to the fuel tank pressure sensor.
  3. Install the fuel tank. Refer to Fuel Tank Replacement (Short Wheel Base)  or Fuel Tank Replacement (Long Wheel Base) .
About FixVault