Inflatable Restraint Steering Wheel Module Replacement
Steering Wheel Module Replacement
| Callout | Component Name | ||||||
| Caution: Refer to SIR Inflator Module Handling and Storage Caution
in Cautions and Notices. Caution: Refer to SIR Caution in Cautions and Notices. Fastener Tightening Specifications: Refer to Fastener Tightening Specifications . Preliminary Procedures Disable the supplemental inflatable restraint (SIR) system. Refer to SIR Disabling and Enabling . On back side of the steering wheel are 2 circular openings, place the wheel so that one opening is on top. Using a blunt-ended tool, push the spring fastener inward through the access hole. Repeat the step for the other opening. |
|||||||
| 1 | Steering Wheel Inflatable Restraint Module Tip Release the connector position assurance (CPA) retainer. Disconnect the electrical connectors. Fully deploy the module before disposal. If the module was replaced under warranty, fully deploy and dispose of the module after the required retention period. Refer to Inflator Module Handling and Scrapping . |
||||||