FixVault
Home › Saturn › 2007 › Ion Red Line › Repair and Diagnosis › Body & Frame › Frames, Subframes & Crossmembers › Frame And Underbody › Repair Instructions › Splash Shield Replacement - Engine › Installation Procedure

Installation Procedure

    Fig 1: View Of Engine Splash Shield & Retainers
    GM851684Courtesy of GENERAL MOTORS CORP.
  1. Install the engine splash shield by inserting the push-in retainers.
    2. NOTE: Refer to Fastener Notice .
  2. Install the air cleaner intake duct bolt.

    Tighten:  Tighten the bolt to 10 N.m (88 lb in).

  3. Install the front fender liner. Refer to Front Fender Liner Replacement 
  4. Lower the vehicle.
About FixVault