FixVault
Home › Saturn › 2007 › Ion Red Line › Repair and Diagnosis › Engine Performance › System › Engine Controls And Fuel - Introduction (2 Of 2) › Repair Instructions › Barometric Pressure Sensor Replacement › Installation Procedure

Installation Procedure

    Fig 1: Identifying BARO Sensor
    GM1686751Courtesy of GENERAL MOTORS CORP.
  1. Install the BARO sensor.
    2. NOTE: Refer to Fastener Notice .
  2. Install the BARO sensor bracket and bolt.

    Tighten:  Tighten the bolt to 10 N.m (89 lb in).

  3. Connect the BARO sensor harness connector.
About FixVault