FixVault
Home › Saturn › 2007 › Ion Red Line › Repair and Diagnosis › Engine Performance › System › Engine Controls And Fuel - Introduction (2 Of 2) › Repair Instructions › Boost Control Solenoid Replacement › Installation Procedure

Installation Procedure

    Fig 1: Identifying Boost Control Solenoid
    GM1686667Courtesy of GENERAL MOTORS CORP.
    NOTE: Refer to Fastener Notice .
  1. Install the boost control solenoid and nut.

    Tighten:  Tighten the nut to 10 N.m (89 lb in).

  2. Connect the boost control solenoid connector.
About FixVault