FixVault
Home › Saturn › 2007 › Ion Red Line › Repair and Diagnosis › External Pages › Different car › Section 15 (Cruise Control System) › Repair Instructions › Cruise Release Switch Adjustment

Cruise Release Switch Adjustment

WARNING: This page is about a different car, the 2004 Saturn Ion Red Line, 2004 Saturn Ion 3, 2004 Saturn Ion 2, and 2004 Saturn Ion 1. However, it is still accessible from the selected car via links, so may be relevant.
  1. Ensure that the cruise control release switch is fully seated in the bracket.
  2. Slowly pull the brake pedal rearward until the audible clicking is no longer heard.

    The switch will be moved in the retainer providing adjustment.

    3. Fig 1: View Of Cruise Control Release Switch
    GM857203Courtesy of GENERAL MOTORS CORP.
  3. Release the brake pedal.
  4. Ensure that the following contacts open at 25.4 mm (1 in) or less of pedal travel:
    1. The release switch (1)
    2. The stop lamp and torque converter clutch (TCC) switch.
    5. Fig 2: Locating Release Switch Contact
    GM738588Courtesy of GENERAL MOTORS CORP.
  5. Ensure the switches open simultaneously or before the onset of braking.
  6. The brake pedal may travel up to 25.4 mm (1 in) before the cruise control system disengages.
About FixVault