FixVault
Home › Saturn › 2007 › Ion Red Line › Repair and Diagnosis › External Pages › Different car › Section 32 (Wipers System And Washers System) › Repair Instructions › Hose Replacement - Windshield Washer › Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2004 Saturn Ion Red Line, 2004 Saturn Ion 3, 2004 Saturn Ion 2, and 2004 Saturn Ion 1. However, it is still accessible from the selected car via links, so may be relevant.
  1. Position the washer hose to the vehicle.
  2. Route the washer hose pump end down alongside the right front inner fender and into the right front inner fender area.
  3. Connect the washer hose to the attachments at the air inlet grille panel.
    4. Fig 1: View Of Washer Hose
    GM815215Courtesy of GENERAL MOTORS CORP.
  4. Lower the vehicle.
  5. Connect the washer hose to the washer pump.
    6. Fig 2: View Of Washer Hose & Washer Pump
    GM815217Courtesy of GENERAL MOTORS CORP.
  6. Install the right front fender liner. Refer to Front Fender Liner Replacement in Body Front End.
  7. Close the hood.
About FixVault