FixVault

Installation Procedure

WARNING: This page is about a different car, the 2004 Saturn Ion Red Line, 2004 Saturn Ion 3, 2004 Saturn Ion 2, and 2004 Saturn Ion 1. However, it is still accessible from the selected car via links, so may be relevant.
  1. Position the side marker lamp to the fender.
  2. NOTE: Refer to Fastener Notice in Cautions and Notices.
  3. Install the side marker lamp retaining screw.

    Tighten:  Tighten the screw to 2.5 N.m (22 lb in).

  4. Install the side marker bulb/socket into the lamp housing by rotating the socket clockwise.
  5. Fig 1: View Of Front Side Marker Lamp
    GM866875Courtesy of GENERAL MOTORS CORP.
  6. Install the headlamp assembly. Refer to Headlamp Assembly or Headlamp Bulb Replacement .
  7. Close the hood.