FixVault
Home › Saturn › 2007 › Ion Red Line › Repair and Diagnosis › External Pages › Different car › Section 9 (Lighting Systems) › Repair Instructions › Stop Lamp Switch Replacement › Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 Saturn Ion Red Line, 2004 Saturn Ion 3, 2004 Saturn Ion 2, and 2004 Saturn Ion 1. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the accelerator pedal retaining nuts. Move the pedal aside.
    2. Fig 1: View Of Accelerator Pedal
    GM878828Courtesy of GENERAL MOTORS CORP.
  2. Remove the stop lamp switch by grasping the switch and turning it counterclockwise while pulling toward the front of the vehicle.
  3. Disconnect the stop lamp switch electrical connector.
    4. Fig 2: View Of Stop Lamp Switch
    GM877870Courtesy of GENERAL MOTORS CORP.
About FixVault